by Orion Sleep

Best Mattress Pads That Heat and Cool Your Bed

Mattress pads that heat and cool, compared: warmth when you want it, cooling when you don't, separate sides, temperature range, and water vs. air.

Best Mattress Pads That Heat and Cool Your Bed

The key takeaways

  • A mattress pad that heats and cools lets one person warm the bed at one point in the night and cool it at another, with one product.
  • The Orion Sleep System runs from 50°F to 113°F on the mattress you already own, and its typical schedule keeps you cool throughout the night then warms the bed gradually before your wake time.
  • Sleepme's Chilipad 2.0 is a water-based pad that runs from 55°F to 115°F, sold for one sleeper or with two zones for both sides of the bed.
  • The Perfectly Snug Smart Topper heats and cools with air inside a 2-inch topper, with two zones on Queen and larger.
  • A heated mattress pad only warms, and it isn't the same thing as an electric blanket.

One mattress pad, more than one temperature

Plenty of people who sleep hot don't want a cold bed all night. They want a warm bed to climb into, a cool one once they're asleep, and some warmth back before the alarm. When hot flashes or night sweats wake you, a single night can swing from too hot to chilled.

And temperature preferences can vary between nights. That warm cozy feeling you seek in the winter is different than the cooling feeling you seek in the summer.

A mattress pad that heats and cools handles both directions from one product. Instead of pushing the covers off and pulling them back, you change the temperature of the surface you sleep on.

The pads below are compared on how far the temperature goes in each direction, whether each side can be set separately, and whether they use water or air.

Quick picks by need

  • Warmth and cooling at different points in the night, with your own setting on your side: Orion Sleep System.
  • A Twin XL, or a half-size setup: Sleepme Chilipad 2.0.
  • Heating and cooling inside a cushioned topper, including Split King: Perfectly Snug Smart Topper.
  • Warmth only on a budget: A heated mattress pad.
  • A cooling fabric layer only: Slumber Cloud Performance Mattress Pad.

Orion Sleep System: heating and cooling, on the mattress you have

The Orion Sleep System adds heating and cooling to the mattress you already own. The Smart Cover fits over your mattress like a fitted sheet and is about as thin as one. A Control Tower beside the bed cools or heats water and circulates it through the cover, and your own sheets go on top.

The water runs anywhere from 50°F to 113°F, so the same cover can warm the bed on a cold night and cool it on a hot one. Orion's typical schedule starts cooling before bed, holds cool through the night, and warms the bed gradually before your wake time. If a hot flash wakes you, you can set your side to cool down.

If you share the bed, each side is its own zone, so your partner's setting doesn't have to match yours. Partners and guests can get their own access in the app, so there's no need to fight over temperature. It comes in Queen, King, and California King, for mattresses 10 to 18 inches deep, on a standard bed or a single adjustable base kept nearly flat.

Heating and cooling are included with the system and don't need a subscription. Orion Intelligence, the optional sleep tracking layer, and if you cancel it, the bed keeps heating and cooling.

Best for: People who want heating and cooling with control over temperature, with each side of the bed set separately.

Separate sides: Yes. Two zones, each with its own setting.

Temperature range: 50°F to 113°F, set in degrees.

Sleepme Chilipad 2.0: water-based, for twin XL, full, and split king

The Chilipad 2.0 is Sleepme's water-based heating and cooling pad. A cover goes on top of the mattress, and a dock beside the bed, filled with distilled water, cools or heats the water that runs through it. It comes in sizes Orion doesn't, including twin XL, full, and split king, so it's the choice if your bed is one of those.

Best for: A single sleeper on a one-zone setup, or a twin XL, full, or split king bed.

Separate sides: Yes, with the two-zone option.

Temperature range: 55°F to 115°F.

Perfectly Snug Smart Topper: heating and cooling inside a thick topper

The Perfectly Snug Smart Topper is a 2-inch topper with its heating and cooling built in. Fans at the foot of each zone push air under and around your body, built-in electric heat and a foot heater add warmth, and you choose from 20 levels across heating and cooling. Because it's a topper, it adds a cushioned layer to the bed as well. It can also preheat the bed before you get in, and it comes in twin through california king, plus split king.

Best for: Sleepers who want heating, cooling, and a softer top layer in one product.

Separate sides: Yes on queen, king, california king, and split king. twin, twin XL, and full have one zone.

Temperature range: 20 levels across heating and cooling, rather than degrees.

Heating and cooling mattress pads compared

Specs as each maker listed them on November 5, 2026.

Product Heats and cools with Temperature range Separate sides Subscription Fit
Orion Sleep System Water 50°F to 113°F Yes Not required for heating and cooling Queen, King, Cal King
Sleepme Chilipad 2.0 Water 55°F to 115°F With the two-zone option Not required Twin XL, full, queen, king, cal king, split king
Perfectly Snug Smart Topper Air 20 levels Queen and larger None Twin to cal king, plus split king

Water or air?

Water-based pads run water through a thin cover, so the change in temperature comes through the surface you lie on and nothing blows on you. Air-based products move air through a topper or the bedding, so you feel the air itself.

Our guide to water vs. air bed cooling goes through the difference, and what each one feels like at night, in more detail.

Heat-only and cool-only options

If you only ever need one direction, a single-purpose pad does that one job for less. Heated mattress pads, from brands such as Sunbeam and Beautyrest, warm the bed with heating wires inside the pad and a plug-in controller. They don't have a cooling setting.

For cooling only, Slumber Cloud's Performance Mattress Pad has a TENCEL top fabric with an Outlast coating, a phase-change material meant to manage heat. It goes under your fitted sheet and can't be set to a temperature.

Heating and cooling mattress pads: common questions

Can each side of the bed be set to a different temperature?

With two zones, yes. Orion sets each side anywhere from 50°F to 113°F. The Chilipad 2.0 has a two-zone option, and the Perfectly Snug Smart Topper has two zones on queen and larger.

Do heating and cooling mattress pads need a subscription?

Not for temperature control. Orion's heating and cooling don't require a subscription, and Orion Intelligence, the sleep tracking layer, is optional. Sleepme says no membership is required for the Chilipad, and Perfectly Snug lists no subscription fees.

Is a heated mattress pad the same as an electric blanket?

No. A heated mattress pad sits under your fitted sheet and warms you from below, and an electric blanket goes on top. The Consumer Product Safety Commission's guidance for electric blankets warns against tucking them in, covering them while they're on, or folding them in use.

Want your side of the bed warm or cool, whenever you choose? See how the Orion Sleep System heats and cools.

Experience Orion. Free 30 day trial

Orion didn't improve your sleep? We offer a 30 day no hassle free trial. Your money back if Orion doesn't deliver.

Order Sleep System
  • ✓ Free Shipping
  • ✓ HSA/FSA Eligible
  • ✓ 30-Day Returns